The Trimble® SPS882 GNSS Smart Antenna is the most flexible site positioning system available to heavy highway and marine construction contractors. The SPS882 GNSS Smart Antenna delivers unmatched power, accuracy and performance in a rugged, compact unit that can stand up to the harsh conditions typically found on construction sites. Built on the Trimble Maxwell 6 GNSS chip, the SPS882 is available in a range of options to suit your construction applications, flexibility and performance requirements. Now you have the ideal tool for:
General | |
Keyboard and display | LED indicators for satellite tracking, radio link reception and power monitoring On/Off key for one-button startup |
Dimensions (W x D) | 19 cm (7.5 in) × 11.2 cm (4.4 in) |
Weight | 1.35 kg (2.97 lb) receiver only including radio and battery Complete system (rover including controller and pole) 3.7 kg |
Environmental | |
Operating1 | –40 °C to +65 °C (–40 °F to +149 °F) |
Storage | –40 °C to +75 °C (–40 °F to +167 °F) |
Humidity | 100%, condensing |
Waterproof | IP67 for submersion to depth of 1 m (3.3 ft), dustproof |
Pole drop | Designed to survive a 2 m (6.6 ft) pole drop onto concrete |
Measurements | • 220-channel L1C/A,L1/L2/L2C. Upgradable to L5 and GLONASS L1/L2C/A, L1/L2P Full Cycle Carrier • Trimble EVEREST™ multipath signal rejection • 4-channel SBAS L1 C/A, L5 (WAAS/EGNOS/MSAS) |
Code differential GPS positioning2 | |
Horizontal accuracy | 0.25 m + 1 ppm RMS (0.8 ft + 1 ppm RMS) |
Vertical accuracy | 0.50 m + 1 ppm RMS (1.6 ft + 1 ppm RMS) |
Real-time kinematic (RTK) positioning3 | |
Horizontal accuracy | 8 mm + 1 ppm RMS (0.026 ft + 1 ppm RMS) |
Vertical accuracy | 15 mm + 1 ppm RMS (0.05 ft + 1 ppm RMS) |
Initialization time | |
RTK operation with a single base station | 1 second + 1 second per 10 km |
Regular RTK operation within RTK network | Minimum 1.5 seconds + 0.5 seconds per 10 km |
Initialization reliability3 | >99.9% |
Power | |
Internal | Rechargeable, removable 7.4 V, 2.4 Ah Lithium-ion battery in internal battery compartment |
External | External power input with over-voltage protection 11 V DC to 28 V DC external power input |
Power consumption | 3.2 W, in RTK mode with internal radio |
Operation time on internal battery | |
Rover | 5 hours; varies with temperature |
Base station with internal radio | 3.7 hours; varies with temperature |
Regulatory Approvals | • FCC certification Class B Part 15, 22, 24 • Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada • Canadian RSS-310, RSS-210, and RSS-119 • Cet appareil est conforme à la norme CNR-310, CNR-210, et CNR-119 du Canada • CE mark compliance • C-tick mark compliance • RoHS compliant • WEEE compliant |
Communications | |
Lemo (Serial) | 7-pin 0S Lemo, Serial 1, 3-wire RS-232 |
Modem 1 (Serial) | D-sub, Serial 2, Full 9-wire RS232 |
Bluetooth wireless technology | Fully-integrated, fully-sealed 2.4 GHz Bluetooth module4 |
Internal radio output | 0.5 W |
External GSM/GPRS, cell phone support | Supported via the SCS900 and SPS controller |
Receiver position update rate | 1 Hz, 2 Hz, 5 Hz, 10 Hz, and 20 Hz positioning |
Correction data input/output | CMR™, CMR+™, CMRx, RTCM3, RTCM 2.x (with Rover/Base upgrade) |
Data outputs | NMEA, GSOF |
1 Receiver will operate normally to –40 °C. Internal batteries are rated to –20 °C.
2 Accuracy and reliability may be subject to anomalies such as multipath, obstructions, satellite geometry, and atmospheric conditions. Always follow recommended practices.
3 May be affected by atmospheric conditions, signal multipath, and satellite geometry. Initialization reliability is continuously monitored to ensure highest quality.
4 Bluetooth type approvals are country specific.